Which Flex Hoses are the best?
#1
Posted 05 November 2014 - 02:09 PM
Also, I'm going to be using Nitrox with these hoses and I would need 2 LP and 1 HP.
Any suggestions?
#2
Posted 05 November 2014 - 03:34 PM
As for the flex hoses, I'm a big fan. I replaced all my hoses last year with miflex hoses. They are very durable and actually tend to last longer, are lighter, and more flexible than rubber hoses. There are a couple of brands for flex hoses that have come out, for the most part they are either from online scuba gear retail sites that sell their house brand "braided hoses" and then there's the Miflex brand.
I've used both kinds and haven't noticed any real differences. For the most part all of my hoses are now Miflex though. The Miflex brand has a long history now and all the feedback I've gotten from other divers and LDS's has been great about them. I have over 150 dives on my set and they look as new as the day I bought them.
The HP hoses had some issues a few years ago when they first started being widely used. Since then the newer production HP hoses have a great track record.
They're lighter, stronger, more durable and more flexible, in my opinion well worth the investment. I would stick with miflex brand.
Good Luck!
I'm looking to upgrade my hoses to flex (braided) hoses but I'm not sure which ones will hold up the best. I like that they weigh less for travel and well flex more and don't fight you so much. I've looked at MiFlex and I like that I can get cool colors other than black, but are they long lasting?
Also, I'm going to be using Nitrox with these hoses and I would need 2 LP and 1 HP.
Any suggestions?
#3
Posted 05 November 2014 - 07:16 PM
Each wreck has a tale to tell about its life and its demise.
If you are observant while diving in dark places listen to the account each has to tell, You cannot come away unaffected.
Changes in Latitude, Changes in Attitude
#4
Posted 06 November 2014 - 01:10 AM
Thanks for the input, Jerry! It's good to know that even the off brands are holding up and doing the intended job!
Roatan was Awesome! Wish you could have been there, Jose!! I'm seriously looking at Dominica next (May)!
#5
Posted 06 November 2014 - 11:13 PM
The miflex hoses are all pretty much priced about the same on most websites. If you're still diving with your backup reg on a necklace (highly recommend) then I would go with a 24" hose for that one, you're never donating that one. For the primary reg it's kind of preference. Minimum 30", but I would recommend 40". Since thats the hose you would donate in an out of air emergency, you want that one to give you and your buddy enough length to maneuver. Two and half feet (30") just isn't a lot of clearance when its stretching from the first stage behind you over your shoulder to a diver in front of you. Or you can get a little training on 7' long hose and get the added length, helpful in open water and essential in confined spaces.
Oh and if you do the HP miflex for your spg, I think I use a 24"-26" hose.
Dominica is definitely one that I'm seriously considering!
Edited by jesterdiver, 06 November 2014 - 11:15 PM.
#6
Posted 14 November 2014 - 12:20 PM
I wanted to bring this back to the top and see if there is anymore input on this topic. there has to be some more experience with flex hoses out there. what do you all think?
- SassyLilCutie likes this
Each wreck has a tale to tell about its life and its demise.
If you are observant while diving in dark places listen to the account each has to tell, You cannot come away unaffected.
Changes in Latitude, Changes in Attitude
#7
Posted 19 November 2014 - 09:06 AM
I'm still in the camp of going with Miflex since it's an easily traceable brand and has a good track record. My hoses still look like new and the weight savings can't be ingnored.
#8
Posted 19 November 2014 - 11:52 AM
#9
Posted 19 November 2014 - 12:01 PM
Interesting timing...I'm in Cozumel and one of my best dive buddies agreed to use a brand new Miflex hose to test it on his dives here to prove to him that all their issues have been fixed. We dive a technical configuration with 7' hoses. Our first dive, catastrophic failure - not a leak at the fitting, not small bubbles, a 6-8" section of the primary hose failed, luckily it was immediately upon entry, so he aborted the dive and no harm was done - well, other than he missed a great dive. For me, the weight savings can be found in other areas and I'll stick with my good ol' rubber hoses. They don't flop all over the place, stay where they belong and comfort factor is big for me. Good luck with yours, though!
Traci,
Did the hose pop and create a hole?
#10
Posted 19 November 2014 - 12:46 PM
Interesting timing...I'm in Cozumel and one of my best dive buddies agreed to use a brand new Miflex hose to test it on his dives here to prove to him that all their issues have been fixed. We dive a technical configuration with 7' hoses. Our first dive, catastrophic failure - not a leak at the fitting, not small bubbles, a 6-8" section of the primary hose failed, luckily it was immediately upon entry, so he aborted the dive and no harm was done - well, other than he missed a great dive. For me, the weight savings can be found in other areas and I'll stick with my good ol' rubber hoses. They don't flop all over the place, stay where they belong and comfort factor is big for me. Good luck with yours, though!
Hey Traci,
Wow, that's crazy. I also use a long hose/short hose config and haven't had a problem to date with over 150 dives on them. I'm hoping it was an isolated incident with a defect on a new hose. Can you confirm it was the miflex brand and not one of the generics or house brands? Thanks for the feedback!
J
#11
Posted 19 November 2014 - 01:05 PM
#12
Posted 19 November 2014 - 01:18 PM
Traci,
Did the hose pop and create a hole?
#13
Posted 19 November 2014 - 02:50 PM
I am in need or replacing my hoses as well, and was talking with someone on a recent trip. One thing that was told to me is that there is an increase in drag with the flex hoses. It doesnt matter much on most dives, but i do a lot of river diving. I was told that I would definitely feel a constant tugging on my reg. As I have never had an issue with the rubber hoses, the extra drag in the water seems like it will sway me towards new rubber hoses. Any thoughts?
Ed
#14
Posted 19 November 2014 - 03:33 PM
I am in need or replacing my hoses as well, and was talking with someone on a recent trip. One thing that was told to me is that there is an increase in drag with the flex hoses. It doesnt matter much on most dives, but i do a lot of river diving. I was told that I would definitely feel a constant tugging on my reg. As I have never had an issue with the rubber hoses, the extra drag in the water seems like it will sway me towards new rubber hoses. Any thoughts?
Ed
I've dove rubber, Miflex and gnereic braided hoses. I haven't felt any difference in the drag characteristics of any of them. the only thing I can think of is that since rubber hoses are stiffer they may not "flex" as much when facing strong currents, but what I think that translates into is more that the "sensation" of drag is more intermttent with flexible hosing and more constant with rubber hoses. In other words if you're in a variable current situation like in a river, the pull on the hoses will tend to feel more consistent on rubber hoses and flexible hoses may have more of a flapping sensation. But drag is drag and all things being equal, such as the length of hoses, there is no reason I can think of that there would be any more drag on one hose versus the other.
Technically rubber hoses are smooth while flex hoses are braided and have a more textured feel to them. But I really can't imagine the the drag coefficient difference would be noticeable. That being said I have never dove them in a river so others may have a better answer. I've dove both types of hoses in strong open water currents and felt no difference. What I like about flex hosing is that there "generally" is a lot less pull on the reg on flex hoses than on stiffer rubber hoses. I had an issue with jaw fatigue on rubber hoses that the flex hoses solved instantly. Granted this could also be addressed with swivel joints or elbow fittings, but I try to avoid things like that as they are just additional failure points in the system, KISS as my instructor says! LOL!
#15
Posted 19 November 2014 - 05:01 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users